Harsh POE Switch Package
• PoE supports IEEE 802.3af/at standards and provides a maximum output of 30W for each port
• Multiple working modes to address your business needs: VLAN、CCTV
• VLAN mode: Downlink ports can communicate only with uplink ports.
• CCTV mode: The port is forced to speed down to 10Mbps transmission rate. Data transmission and power supply distance up to 250 meters.Downlink ports can communicate only with uplink ports.
• Supports IEEE802.3x full-duplex flow control and Backpressure half-duplex flow control
• Panel indicators monitor working status and assist in fault analysis
• Operating temperature: -30°C to 65°C
| KIT/1*ISW2000-4T2GP-POE-IN/1*PWR-DC5218-A-NB | ||||||||
| Hardware Specification | ||||||||
| Standards | IEEE802.3、IEEE802.3u、IEEE802.3z、IEEE802.3ab、IEEE802.3x、IEEE802.3af、IEEE802.3at | |||||||
| Ports Type | 4*10/100Mbps RJ45 Ports | |||||||
| 2*1000Mbps SFP Slots | ||||||||
| Switching capacity | 4.8Gbps | |||||||
| Jumbo Frame | 16KBytes | |||||||
| Forwarding performance | 3.57Mpps | |||||||
| Packet Buffer | 2 M bit | |||||||
| MAC | 4K | |||||||
| Transfer Mode | Store-and-forward | |||||||
| Max. PoE Power | Max capacity: 65 W, Max capacity for single port: 30 W | |||||||
| Dimensions (W×D×H) | 145*109*58mm | |||||||
| Operating Temperature | -30°C to 65 °C | |||||||
| Operating Humidity | 5% ~ 95% non-condensing | |||||||
| Storage Humidity | 0% ~ 95% non-condensing | |||||||
| Indicator | PWR, LNK/ACT, PoE,DATA | |||||||
| Electrostatic Standard | Contact ±6KV, Air ±8KV | |||||||
| Surge Protection | Differential mode ±2KV Common mode ±4KV | |||||||
| Sinrato Themes | 09/04/2019 |
ინგლისური
ქართული